2007 Lincoln Town Car Signature 4.6L V8 EFI SOHC White Odometer is 719 miles below market average!
All New acc.Racepak,MSD Grid,Windows,carbon,Windows. SCOTT CITY, MO 63780 (573) 264-4641 (573) 450-8668
Condition: Used Brand: N/A Manufacturer Part Number: N/A Six assorted aluminum drive flanges are all 24 spline. There are also two caps as shown. All used. All Good Condition. All items are sold as is, no warranty expressed or implied. I try to represent my items to the best of my ability, and if you are not satisfied due to fault of mine, you will receive a full refund. If there is a problem w...
Condition: Used Brand: N/A Manufacturer Part Number: N/A Thermostat housing with four 8 AN ports for a small block Chevy. Used. Very Good Condition. All items are sold as is, no warranty expressed or implied. I try to represent my items to the best of my ability, and if you are not satisfied due to fault of mine, you will receive a full refund. If there is a problem with the item, please contac...
Condition: Used Manufacturer Part Number: N/A Brand: N/A Five pieces of 6 AN steel braided lines with fittings. There is one piece that is 11" long with one 90 degree fitting and one 45 degree fitting. There is one 36 1/2" long with one 90 degree fitting and one straight fitting. One piece 42 3/4" long with two straight fitting. One 53" long with one straight fitting only. One 60" with one 90 d...
Condition: Used Manufacturer Part Number: N/A Brand: N/A Five pieces of 8 AN steel braided lines with fittings. There is one piece of 12" long with two straight fittings. There is one 12 1/2" long with two straight fittings. One 19 1/2" long with one 90 degree and one 45 degree fitting. One 21" long with one 90 degree and one straight fitting. One 32" long with one straight fitting only. All li...
Condition: Used Manufacturer Part Number: N/A Brand: N/A Dayco 3/16" down nozzle lines are all 18 1/2" long. Full set of 8. 500 PSI. Lines are used but are in Very Good condition. All items are sold as is, no warranty expressed or implied. I try to represent my items to the best of my ability, and if you are not satisfied due to fault of mine, you will receive a full refund. If there is a probl...
Condition: Used Brand: N/A Manufacturer Part Number: N/A DMI hub is stepped, comes with dust cover, nuts, bearings and seals. Aluminum step spindle is a Sanders with 3 3/4" mount center. Aluminum arm. All are used with some scratches. All Good Condition. All items are sold as is, no warranty expressed or implied. I try to represent my items to the best of my ability, and if you are not satisfie...
Condition: Used Brand: N/A Manufacturer Part Number: N/A DMI hub is straight, comes with dust cover, nuts, bearings and seals. Aluminum Winters spindle is straight with a 3 1/4" mount center also. Aluminum DMI combo arm has 3 1/4" mount center. Aluminum brake mount. Aluminum 3/8" rotor shows some wear. All are used with some scratches. All Good Condition. All items are sold as is, no warranty e...
Condition: Used Brand: N/A Manufacturer Part Number: N/A DMI rear torsion arms have 1 1/8" splines that are good in both arms. Left rear arm measures 15 1/8" long with a 2 1/2" offset. Right rear is 14 1/8" long with a 4 1/2" offset. Both arms are used with a few rock scratches. Both Good Condition. All items are sold as is, no warranty expressed or implied. I try to represent my items to the b...
Condition: Used Brand: N/A Manufacturer Part Number: N/A DMI rear torsion arms fit standard chassis. Right arm measures 14 1/2" long from center of the splines to the end of the arm and is 4 1/4" offset. The left arm measures 14 7/8" and is 2 3/4" offset. Both are used with some small scratches. Good Condition. All items are sold as is, no warranty expressed or implied. I try to represent my it...
Condition: Used Brand: N/A Manufacturer Part Number: N/A DMI Steel u-joint with DMI aluminum flange. Comes with spring. Splines are good. Used with some small scratches as shown. Good Condition. All items are sold as is, no warranty expressed or implied. I try to represent my items to the best of my ability, and if you are not satisfied due to fault of mine, you will receive a full refund. If t...
Condition: Used Brand: N/A Manufacturer Part Number: N/A DSR fuel manifold has one 8 AN and three 6 AN fittings. All ends are good. Used. Good Condition. All items are sold as is, no warranty expressed or implied. I try to represent my items to the best of my ability, and if you are not satisfied due to fault of mine, you will receive a full refund. If there is a problem with the item, please c...
Condition: Used Brand: N/A Manufacturer Part Number: N/A DSR zero fuel pump. Has three way manifold with -6 male ends and one -12 male end on the other side of pump. Spud looks good. Pump turns, feels ok. Used. Good Condition. All items are sold as is, no warranty expressed or implied. I try to represent my items to the best of my ability, and if you are not satisfied due to fault of mine, you ...
Condition: Used Brand: N/A Manufacturer Part Number: N/A DSR main pill holder has An 6 ends that are good, no chips. No pills are included. Used with a few scratches, which are actually scribe markings from a previous owner. Good Condition. All items are sold as is, no warranty expressed or implied. I try to represent my items to the best of my ability, and if you are not satisfied due to fault...
Condition: Used Brand: N/A Manufacturer Part Number: N/A Dynatech small block Chevy standard port headers. Tubes step from 1 3/4" to 1 7/8". Headers are used with only a few small rock dents on front of tubes. 3 1/2" collectors. There will be no international shipping on this item. Ships to 48 states only. Very Good Condition. All items are sold as is, no warranty expressed or implied. I try to...
Condition: Used Brand: N/A Manufacturer Part Number: N/A One Eagle front arm measures 17 1/4" long from the center of the splines to the end of the arm. Shows a little wear at the axle contact point. Right rear arm measures 14 1/4" long from the center of the splines to the end of the arm. Comes with heim shown. Splines are good on both arms. Both are used with some scrapes and scratches. Both ...
Condition: Used Brand: N/A Manufacturer Part Number: N/A FSR direct mount radiator measures 18 3/4" wide x 10 7/8" tall x 2 1/4" thick. No holes, leaks, repairs. One mount bent a little as shown. The bottom of tank has a slight bow as shown. AN 10 and AN 6 fittings. Good Condition. All items are sold as is, no warranty expressed or implied. I try to represent my items to the best of my ability,...
Condition: Used Brand: N/A Manufacturer Part Number: N/A FSR engine mount radiator part # 1105-1 measures 18 7/8" long, 12" tall and 4 1/4" wide including filler neck. Radiator has a few bent fins. No holes, leaks or repairs. Used. Good Condition. All items are sold as is, no warranty expressed or implied. I try to represent my items to the best of my ability, and if you are not satisfied due t...