$450Shipped. This is a like new Eaton 30 spline posi-unit with very little use. Changed directions with the car and decided to put a spool in it is the only reason for selling. It comes exactly as pictured. Came out of a gm-12 bolt rearend. 4.11 Motive Ring and pinion with bearings and races.. Cape Girardeau , MO 63701 (573) 318-0201
$500 Shipped. This is a like new Eaton 30 spline posi-unit with very little use. Changed directions with the car and decided to put a spool in it is the only reason for selling. It comes exactly as pictured. Came out of a gm-12 bolt rearend. 4.11 Motive Ring and pinion with bearings and races.. Cape Girardeau , MO 63701 (573) 318-0201
$500 Shipped. This is a like new Eaton 30 spline posi-unit with very little use. Changed directions with the car and decided to put a spool in it is the only reason for selling. It comes exactly as pictured. Came out of a gm-12 bolt rearend. 4.11 Motive Ring and pinion with bearings and races. Respond here, call, or text 573-318-0201. Cape Girardeau , MO 63701 (573) 318-0201
Returns Accepted: ReturnsNotAccepted Part Brand: Ford Warranty: No Country of Manufacture: United States For sale running 59 A-B Flathead V 8 motor. This engine came out of my late 40's pick up. Ran perfect no issues. Been stored in my basement. Have all attached parts carburator, distributor, generator, fuel pump and other assorted parts. In running condition. I have listed it for $2500 which ...
Condition: New Manufacturer Part Number: DVK-2 Vacuum Line Hose Kit, Concours Quality for 1968-1970 390 and 428 Cobra Jet/SCJ with MANUAL Transmission. All vacuum hoses have correct color stripping with repeating MX markings. Manufactured by original suppliers. Markings are very durable and don t come off easily. Please Note: These hoses ARE NOT Blue, they are the correct light dull black with ...
Condition: New Unique Engine Timing Pointer for 1969/1970 428 SUPER Cobra Jet equipped Mustang/Shelby. Concours Quality USA made reproduction of a very hard to find item. Proudly Manufactured in the United States of America At SEMO Classic Mustang Inc, High Performance Ford and Shelby is ALL we do. We aren t a side job run out of a garage or a business we started on eBay after we did 1 or 2 res...
Condition: New Manufacturer Part Number: VC-31 Excellent Concours Quality reproduction of the "Snake" style Finned Aluminum Valve Cover that was most commonly sold over the counter through Ford but were used on the assembly line as well in certain cases. This is a great pair of covers with the correct internal Oil Baffle. Will Fit 390, 427, and 428 Cobra Jet, Wll not work with roller rockers. S...
Condition: Used Brand: N/A Manufacturer Part Number: N/A Six assorted aluminum drive flanges are all 24 spline. There are also two caps as shown. All used. All Good Condition. All items are sold as is, no warranty expressed or implied. I try to represent my items to the best of my ability, and if you are not satisfied due to fault of mine, you will receive a full refund. If there is a problem w...
Condition: Used Brand: N/A Manufacturer Part Number: N/A Thermostat housing with four 8 AN ports for a small block Chevy. Used. Very Good Condition. All items are sold as is, no warranty expressed or implied. I try to represent my items to the best of my ability, and if you are not satisfied due to fault of mine, you will receive a full refund. If there is a problem with the item, please contac...
Condition: Used Brand: N/A Manufacturer Part Number: N/A Lightened steel 4.57 ring gear has 32 teeth. No chips or pitting. Used. Very Good Condition. All items are sold as is, no warranty expressed or implied. I try to represent my items to the best of my ability, and if you are not satisfied due to fault of mine, you will receive a full refund. If there is a problem with the item, please conta...
Condition: Used Brand: N/A Manufacturer Part Number: N/A 411 ring gear and pinion. All teeth are good. No pitting. Both are used. Both Very Good Condition. All items are sold as is, no warranty expressed or implied. I try to represent my items to the best of my ability, and if you are not satisfied due to fault of mine, you will receive a full refund. If there is a problem with the item, please...
Condition: Used Manufacturer Part Number: N/A Brand: N/A Five pieces of 6 AN steel braided lines with fittings. There is one piece that is 11" long with one 90 degree fitting and one 45 degree fitting. There is one 36 1/2" long with one 90 degree fitting and one straight fitting. One piece 42 3/4" long with two straight fitting. One 53" long with one straight fitting only. One 60" with one 90 d...
Condition: Used Manufacturer Part Number: N/A Brand: N/A Five pieces of 8 AN steel braided lines with fittings. There is one piece of 12" long with two straight fittings. There is one 12 1/2" long with two straight fittings. One 19 1/2" long with one 90 degree and one 45 degree fitting. One 21" long with one 90 degree and one straight fitting. One 32" long with one straight fitting only. All li...
Condition: Used Brand: N/A Manufacturer Part Number: N/A Aluminum 1/2" eye with 5/8" shaft. There are five right hand thread and five left hand thread. Threads are all good. All come with nuts as shown. All used. All Good Condition. All items are sold as is, no warranty expressed or implied. I try to represent my items to the best of my ability, and if you are not satisfied due to fault of mine...
Condition: Used Brand: N/A Manufacturer Part Number: N/A Aluminum 2 1/2" axle nuts. One left hand thread and one right hand thread. Threads good. Used. Good Condition. All items are sold as is, no warranty expressed or implied. I try to represent my items to the best of my ability, and if you are not satisfied due to fault of mine, you will receive a full refund. If there is a problem with the ...
Condition: Used Brand: N/A Manufacturer Part Number: N/A Pair of aluminum axle nuts fit 2 1/2" axle. One left hand thread and one right hand thread. Splines are good in both. Used. Good Condition. All items are sold as is, no warranty expressed or implied. I try to represent my items to the best of my ability, and if you are not satisfied due to fault of mine, you will receive a full refund. If...
Condition: Used Brand: N/A Manufacturer Part Number: N/A Aluminum front motor plate fits Maxim, J & J, Eagle. Mount spacing is 9" inside and 19 1/2" outside.Used with a few scratches. Good Condition. All items are sold as is, no warranty expressed or implied. I try to represent my items to the best of my ability, and if you are not satisfied due to fault of mine, you will receive a full refund....
Condition: Used Brand: N/A Manufacturer Part Number: N/A Aluminum pitman arm is 13 5/8" long, measuring center to center on mount holes. 1 1/8" splines. 2" offset. Used with some small scratches. Good Condition. All items are sold as is, no warranty expressed or implied. I try to represent my items to the best of my ability, and if you are not satisfied due to fault of mine, you will receive a ...
Condition: Used Brand: N/A Manufacturer Part Number: N/A Two aluminum pitman arms both have 1 1/8" splines. The splines are not angle broached. Splines are good in both arms. Straight arm as 11", 12" and 13" mount space. The offset arm has 13" and 14" mount space and is 1" offset. Both are used with some scratches. Both Good Condition. All items are sold as is, no warranty expressed or implied....
Condition: Used Brand: N/A Manufacturer Part Number: N/A Nine aluminum shock pins. There are three that are 5 1/4" long (two of these are new). There is one each of the following: 4 1/4", 4 1/4", 3 5/8", 3 1/2"(new), 3 1/8"(new) and 2 3/4". Threads are good. All are used except where noted. All Good Condition. All items are sold as is, no warranty expressed or implied. I try to represent my ite...